Why Your Solar Panels Stopped Producing in Mahopac — and How to Fix It

Surf Clean Energy
Solar Service & Repair · Putnam County

Why Your Solar Panels Stopped Producing in Mahopac — and How to Fix It

By Surf Clean Energy · August 30, 2026 · 10 min read

Something Is Wrong — Your Solar System Has Gone Quiet

Your solar system was humming along, then one day you open the monitoring app and see a flat line. Or your electric bill spikes and you realize your panels stopped producing weeks ago without anyone noticing. If you're a homeowner in Mahopac with solar panels that have suddenly gone silent, you are not alone — and in most cases, the fix is more straightforward than you think.

Solar systems are designed to run for 25 to 30 years with minimal intervention, but that does not mean they are immune to faults. Inverters fail. Breakers trip. Squirrels chew wires. Seasonal shading from trees that were not there when your system was installed can cut production by 30–50%. And the longer a problem goes undetected, the more electricity — and money — you lose.

This guide walks you through the most common reasons solar panels stop producing in Mahopac and exactly what you should do about each one.

—

Step One: Run Through the Homeowner Checklist Before Calling Anyone

Many "solar outage" calls turn out to be simple issues a homeowner can resolve in under ten minutes. Before you schedule a service visit, work through this checklist in order.

The 8-Step Solar Troubleshooting Checklist

  1. Check the time and weather. Solar panels produce power only during daylight hours and produce significantly less on heavily overcast days. A fully cloudy December day in Mahopac can cut output by 70–80% compared to a clear June afternoon. If production is low but not zero on an overcast day, that may be normal.
  2. Open your monitoring app. Apps like Enphase Enlighten, SolarEdge mySolarEdge, or SunPower's monitoring portal show real-time and historical production. Look for when production dropped — was it sudden or gradual? A sudden drop often points to an electrical fault; a gradual decline over months suggests soiling, shading, or panel degradation.
  3. Look at your inverter display. Walk to wherever your inverter is mounted — typically your basement, garage, or utility room — and look at the status indicator. A green light or a live wattage reading means it is producing. A red or orange light, a fault code, or a completely blank screen during daylight hours signals a problem.
  4. Check your main electrical panel. Open your breaker box and look for any tripped breakers, especially the one labeled "Solar," "PV System," or "AC Disconnect." A tripped breaker will be in a middle position between on and off. Reset it by switching it fully off, then fully on.
  5. Find and check your AC disconnect switch. Most New York solar installations include a dedicated AC disconnect switch — often a gray or red box mounted near the utility meter or on the exterior wall. Make sure the switch is in the ON position. These can be accidentally switched off by a contractor, a landscaper, or a curious family member.
  6. Find and check your DC disconnect. Located near the inverter, the DC disconnect controls power coming from the panels themselves. Confirm it is switched ON. Some systems also have a combiner box on the roof — do not climb on the roof to check this yourself.
  7. Restart your inverter if the manufacturer allows it. Some inverters (Enphase, SolarEdge, Fronius) support a safe restart procedure. Turn off the AC disconnect, wait 30 seconds, turn it back on. Check the manual or manufacturer website for your specific model's restart procedure.
  8. Check your internet router. If everything electrical looks fine but your monitoring app still shows zero, your inverter may simply have lost its Wi-Fi connection. Restart your home router and check whether your Enphase Envoy, SolarEdge communication gateway, or similar device reconnects. It can take 10–15 minutes to re-establish a data connection and begin reporting production again.

If you work through all eight steps and still see zero or very low production, you have a real fault that needs a professional diagnosis.

—

The Most Common Causes of Solar Production Loss in Mahopac

Inverter Failure

Inverter failure is the single most common reason a solar system in Mahopac stops producing power entirely. The inverter is the brain of your system — it converts DC electricity from the panels into AC power your home can use. Most string inverters carry a 10-to-12-year warranty, and microinverters (like Enphase IQ series) are typically warranted for 25 years.

If your system is more than 10 years old and uses a central string inverter, that inverter is approaching end of life. Common fault codes you might see include "Grid Fault," "Isolation Fault," "Ground Fault," or "Over Temperature." Some of these are recoverable with a restart; others indicate hardware failure.

Inverter replacement costs in New York average $1,500–$2,200 for a standard string inverter on a typical 6–10 kW residential system, and up to $3,500 for larger or premium units. Microinverter replacements on individual panels run $200–$400 per unit for parts and labor. A licensed solar technician can typically diagnose an inverter failure within the first 30 minutes of a service visit.

Tripped AC or DC Disconnect

A tripped or accidentally switched-off disconnect is one of the most common — and most preventable — causes of a solar system producing zero power. Central Hudson, which serves most of Putnam County including Mahopac, requires that all grid-tied solar systems have accessible disconnects for utility and emergency responder access. These switches are sometimes bumped off during routine maintenance, a meter exchange, or even a storm.

If you find a tripped disconnect and reset it but it trips again within a few minutes, do not keep resetting it — that is a sign of a deeper fault (such as a ground fault or wiring issue) and you should call a technician.

Utility and Grid Issues

Grid-tied solar systems are required by New York State interconnection rules (specifically Con Edison, Central Hudson, NYSEG, and other utility tariffs under the PSC's standardized interconnection requirements) to shut down automatically when the utility grid loses power. This anti-islanding protection exists to keep utility workers safe during outages.

If there was a recent power outage in your neighborhood — whether from a storm, a tree down on lines, or Central Hudson grid maintenance — your system may have shut down and failed to restart properly once power was restored. This happens more than homeowners expect, especially with older inverters.

If your neighbors have power but your solar system will not restart, the issue is likely on your side of the meter. If your utility meter is showing unusual readings or your net metering credits have suddenly disappeared from your Central Hudson bill, it is worth calling the utility and a solar technician simultaneously — sometimes a new smart meter installed by the utility can disrupt interconnection communication.

String Faults and Wiring Problems

Most residential solar systems in Mahopac are wired in "strings" — series connections of panels that feed a single inverter input. If one panel or one connection in that string develops a fault, the entire string can go down. A string fault can be caused by a damaged panel, a failed junction box, rodent damage to wiring (a surprisingly common problem in wooded areas like Mahopac), or a corroded connector.

String-level faults often appear as partial production loss rather than a complete outage. You might notice that your system produces 40–60% of what it used to even on a clear sunny day. A licensed technician with a clamp meter and DC diagnostic equipment can trace a string fault in most cases within a single service visit. Repair costs typically range from $300 to $800 depending on the nature of the fault and whether any wiring or components need replacement.

Shading and Soiling

Shading is one of the most insidious causes of gradual solar production loss because it sneaks up on homeowners over years. Trees that were 20 feet tall when your system was installed in 2015 may now be 40 feet tall and casting shadows across your array for several hours each morning or afternoon. Even partial shading on a single panel can disproportionately reduce output across an entire string.

Mahopac's heavily wooded landscape, particularly around Lake Mahopac and the surrounding hills, makes shading a real and ongoing concern for local solar homeowners. If your production has been declining gradually over two or three years, shading is a likely culprit.

Soiling — the buildup of pollen, bird droppings, leaves, and general grime — is less severe in most Northeast climates than in the Southwest, but it can still reduce output by 5–15% on panels that go uncleaned for several years. A professional panel cleaning and inspection typically costs $150–$300 for a standard residential system.

Panel removal and reinstall for tree trimming or roof work averages $600–$1,500 for a 20–30 panel system depending on system complexity and roof access.

Monitoring App Disconnect vs. Actual Production Loss

It is critically important to distinguish between a monitoring communication failure and an actual production failure. If your Enphase Enlighten app or SolarEdge dashboard shows zero production but your breakers look normal and your inverter shows a green status light, you likely have a data communication issue, not a power issue.

To confirm real production, look at your utility meter. If it is spinning backward (on an analog meter) or your digital meter shows export to the grid, your system is producing. You can also check your Central Hudson or NYSEG online account — if net metering credits are still accumulating, your panels are working fine and only the monitoring needs to be reset.

—

Which Problems Require a Licensed Solar Technician?

The following issues should never be DIY repairs. Always call a licensed solar technician for:

  • Any work on the DC wiring between panels and the inverter (high-voltage DC is extremely dangerous)
  • Inverter replacement or advanced fault code diagnosis
  • Roof-level inspections or panel removal and reinstall
  • Ground fault or arc fault conditions
  • Any repair that involves opening the combiner box or string fuses
  • Situations where a disconnect keeps tripping after being reset

In New York, solar electrical work must be performed by a licensed electrician or a licensed solar installer. Putnam County also requires permits for most electrical repairs to interconnected systems — a reputable technician will know when a permit is needed and will handle the paperwork.

—

What a Professional Solar Inspection Includes

A professional solar service visit for a system that has stopped producing should include, at minimum: a visual inspection of all accessible panels for cracks, discoloration, or delamination; inverter error log review and diagnostic testing; DC string voltage and current measurements; AC disconnect and breaker inspection; roof penetration and flashing check for water infiltration; and a monitoring system verification.

A diagnostic service call in the Hudson Valley typically costs $150–$350. Many solar service companies, including Surf Clean Energy, will apply the diagnostic fee toward any repair work performed.

—

Don't Let a Stopped System Cost You All Summer

Every day your solar system sits idle is a day you are paying full retail electricity rates to Central Hudson instead of drawing on power your panels should be generating. A typical 8 kW system in Mahopac produces roughly 9,000–10,000 kWh per year. At current Putnam County electricity rates hovering around $0.22–$0.26 per kWh in 2025, a system that is down for 30 days during peak summer production can represent $150–$250 in lost value — not counting the net metering credits you are failing to accumulate.

The sooner you identify and resolve the problem, the less it costs you in the long run.

—

Get Your Mahopac Solar System Back Online

If you have worked through the checklist above and your solar panels still are not producing, it is time to call in a professional. Surf Clean Energy specializes in solar repair, maintenance, and troubleshooting for homeowners throughout Putnam County, including Mahopac, Carmel, Patterson, and the surrounding area. Whether you need an inverter replacement, a string fault diagnosed, panels removed for a roof project, or just a thorough inspection to find out why your production dropped, the team at Surf Clean Energy can help.

Visit Surf Clean Energy to schedule a diagnostic service visit and get your system producing again.

Frequently Asked Questions

Why are my solar panels not producing any power in Mahopac, NY?

The most common causes include a tripped AC or DC disconnect, a failed inverter, a utility grid issue, or a shading/soiling problem on the panels themselves. Start by checking your breaker panel and inverter display before calling a technician. Many outages can be traced to a single tripped breaker or a communication error that a licensed solar service tech can resolve in one visit.

How do I know if my solar inverter has stopped working?

A working inverter will typically show a green light or a live production reading on its display screen. If you see a red or orange light, a fault code, or a blank screen during daylight hours, your inverter is likely not working and needs to be diagnosed by a licensed solar technician. Inverter replacements in New York typically cost between $1,500 and $3,500 depending on the brand and system size.

Can a PSEG or Central Hudson outage cause my solar system to stop producing?

Yes — grid-tied solar systems are required by New York state interconnection rules to shut down automatically when the utility grid goes down, a safety feature called "anti-islanding." Once your utility (such as Central Hudson, which serves much of Putnam County) restores power, your system should restart on its own within a few minutes. If it does not restart after the grid comes back, you likely have a separate inverter or disconnect issue that requires service.

How much does solar panel repair or service cost in New York?

A diagnostic service visit from a licensed solar technician in the Hudson Valley typically costs between $150 and $350. Repairs vary widely — a tripped disconnect reset may be covered under a service call fee, while a full inverter replacement runs $1,500–$3,500 and panel replacement averages $250–$450 per panel installed. String fault repairs or reconfigurations generally fall in the $300–$800 range depending on labor and parts.

Why does my solar monitoring app show zero production but everything looks fine?

A monitoring app showing zero production does not always mean your panels have stopped working — it often means your inverter has lost its Wi-Fi or cellular connection and is no longer sending data. Check that your home router is online and that the inverter's communication device (such as an Enphase Envoy or SolarEdge gateway) is connected. If production also looks flat on your utility meter or electric bill, then an actual production problem exists and you should schedule a professional inspection.

Need solar repair or service?

Get a free, no-pressure assessment from Surf Clean Energy — repairs, replacements, and panel removal & reinstall.